Dampness, Leaking, Mildew or Mold

Interior Draintile Method

• Cover all your valuables with plastic to prevent damage during the repair.
• Remove the concrete floor (approximately one foot) and remove the old Drain tile (if any) for inspection.
• Flush remaining inside drain tile with high-pressure air and water.
• Drill block cores and test hole for proper drainage.
• Drill Bleeders to exterior drain tile and flush clean to allow system to work.
• Install new drain tile and connect to existing system at area of floor removed.
• Cover drain tile with proper filtering stone to allow water to drain properly.
• Recement floor at work area.
• Check existing Palmer Valve or sump pump system for proper operation.
• Clean job site at area repaired and remove all debris created.

Permits may be required and can be included upon request.